Qualitek Services has an immediate Direct Hire opening for an Electrical Engineer II in Melbourne, FL. REQUIRED SKILLS **** Must be a US Citizen, US Permanent Resident **** ? Responsible for technical activity and completion of assigned task on time and budget ? Design, develop, analyze, document and support testing of products, systems or subsystems ? May use computer-aided engineering or other design/analysis software in the performance of assignments. Ability to work independently, regular reporting of progress and status ? Review customer specifications and requirements, and under direction develops designs to best support them, including cost as a key design variable ? Provide budget, cost and schedule input for design assignments ? Specify and evaluate supplier components
Mechanical Engineer - TS/SCI Required with Security Clearance
Send resumes to: yquintan@harris.com
Perform design and analysis tasks on complex mechanisms and structural design, including the use of composites and lightweight alloys, in a program team environment. Program support includes mission/requirements definition, concept generation, trade studies, design sensitivity/optimization studies, preliminary and final design, and assembly/integration and testing support.
Qualifications
Bachelor's degree or higher in Mechanical Engineering, Aerospace Engineering, Engineering Mechanics, Ocean Engineering or Civil Engineering.
5 years minimum applicable experience.
5 years of CAD or Analysis tools exposure
Preferred Additional Skills
Multi-disciplinary skills (SW and EE) are a plus.
Experience in Pro-Engineer mechanical design tool preferred.
This position requires the candidate to already possess an active TS/SCI clearance and to maintain the clearance.
34913, Engineer-4(Aircraft Power Generation/Distribution) - FL - OM
Category:Engineering
Job Title:Electrical Engineer
Region:FL-Florida
City:Melbourne
State:FL
Rate:$56.00
Duration:3 Months
Description:APU, Electrical Load Analysis, System interlocks~
RESPONSIBILITIES:
Responsibilities include supporting design requirements for electrical power generation, conversion and distribution systems for multiple aerospace programs including but not limited to LEMV, Joint STARS and small surveillance projects. Utilize technical and military specifications to size wiring and define circuit protective requirements of aircraft systems. Troubleshoot aircraft and mission systems, interpret wiring diagrams, Flight Manuals, Illustrated Parts Catalogs and other documentation to create and revise power test procedures and publications. Evaluate and respond to discrepancies to determine feasibility and merit of the proposed task.
REQUIRED EXPERIENCE:
27642 Nuclear Mechanical Design Engineer - Jensen Beach, FL
27642 Nuclear Mechanical Design Engineer Location: Jensen Beach, FL Length: 8 Months If interested, please send resume to robert@ccsiinc.com Description: The Mechanical Design Engineering position is responsible for the technical aspects and engineering design of major projects. Immediate short term engineering support is required in the Mechanical discipline area to support ongoing efforts related to our ongoing projects at the nuclear plant. Mechanical activities for this project include but are not limited to prepare and verify modifications (ECs) and ARs/ACE. Degree in Engineering and at least 5 years of experience at a nuclear plant (this one preferred) is required. The selected individual will be responsible for providing discipline engineering expertise and vendor oversight, which requires nuclear plant engineering experience and application of engineering principles. abc987
27644 Nuclear I&C Design Engineer - Jensen Beach, FL
27644 Nuclear I&C Design Engineer Location: Jensen Beach, FL Length: 8 Months If interested, please send resume to robert@ccsiinc.com Description: The I&C Design Engineer needs to have experience on analog and digital control systems. The work will be the preparation of a design change document to prepare or verify modifications for outage/on line issues. The work will include preparation and checking of drawings, preparation of software quality assurance documents, preparation and review of specifications for the control system and other engineering tasks as assigned. Prepare and verify modifications (ECs) and ARs/ACE. Degree in Engineering and at least 5 years of experience at a nuclear plant is required. abc987
Listing originally posted at http://www.jobmagic.com/job/27644-Nuclear-I-C-Design-Engineer-Job-Jensen-Beach-FL-9316048.html
34912, Engineer 4 (Wiring Installation Engineer) - FL - OM
Category:Engineering
Job Title:Design Engineer
Region:FL-Florida
City:Melbourne
State:FL
Rate:$56.00
Duration:6 Months
Description:Catia V5, Wiring, Electrical~
RESPONSIBILITIES:
Responsibilities to include the development of wiring harnesses/cable assemblies installation designs into air vehicles and/or ground support systems for multiple aerospace programs including but not limited to LEMV, Joint STARS and small surveillance projects. Design of supports as well as routing of electrical cable assemblies, semi-ridged cables and wire harnesses. Position requires extensive inter-departmental coordination with other vehicle system departments including structures, crew & equipment, ECS, maintenance and operations teams. Design tasks using SAE AS 50881 and proven commercial practices as a guide.
REQUIRED EXPERIENCE
34918, Engineer 4 - (Electrical Wiring Design) - FL - OM
Category:Engineering
Job Title:Electrical Engineer
Region:FL-Florida
City:Melbourne
State:FL
Rate:$56.00
Duration:6 Months
Description:Electrical Wiring, AS 50881, System interlocks~
RESPONSIBILITIES:
Responsibilities to include the development, integration and documentation of electrical cable designs for the air vehicle systems for multiple aerospace programs including but not limited to LEMV, Joint STARS and small surveillance projects. Develop wiring designs of a functional system utilizing the Harnesses wiring tool. Create preliminary block diagrams, wiring diagrams and detailed cable assembly. Product Definition Packages. (PDPs) using SAE AS 50881 and proven commercial practices.
REQUIRED EXPERIENCE:
Qualitek Services has an immediate direct hire contract opening for an Mechanical Engineering Manager with optical-mechanical design and Pro-E CAD experience in Melbourne, Florida 32935. REQUIRED SKILLS * Must be a US Citizen * * Must be eligible to obtain a Department of Defense (DoD) clearance * *There is NO relocation assistance available for this position* Candidate must have a Bachelor?s Degree with at least 10 years of previous Mechanical Engineering work experience. Experience and proficiency with Pro-Engineer (Pro-E CAD) and GD&T to design and develop products Experience with design for manufacturing, cost, test, and assembly for military grade equipment Background in thermal and structural BSME or MSME with 10+ years of mechanical engineering experience analysis Experience with infrared imaging systems, opto-mechanical design, and mechanism design Experience with castings, machining
Materials Engineer
We are currently seeking candidates to conduct research in materials selection and troubleshooting for our military and commercial products. Research ranges from metal foams to battery/ultra capacitor electrodes, fuel cell materials, functional coatings, and hydrogen separation, storage and distribution. The ideal candidate will possess:
* Strong fundamentals in materials science and chemistry that allow him/her to understand and adapt to a variety of projects.
* Capability of operating independently in the lab and managing time between projects.
* Interest in one or more of the following topics: lightweight materials; nanomaterials; fuel cell and electrochemical cell materials; corrosion; membranes; catalysis.
Minimum Requirements:
* B.S. is required; M.S. desired; PhD optional.
* Due to US government ITAR restrictions, US Citizenship is required
* B.S. degree in Materials Engineering or Chemical Engineering w/materials specialization
How to Apply:
Mechanical Design Engineer
Mainstream Engineering Corporation (MEC) is currently looking for both Mechanical Design Engineers and Mechanical Research Engineers.
Mechanical Design Position Summary:
As a Mechanical Design Engineer you are capable of designing components and systems for a wide range of R&D projects. Typically the systems are for thermal control or energy conversion applications. We transition R&D to military and commercial products, so part of this job is product development.
Specific skills include:
* Mechanical or machine design experience with CAD/CAM
* Capable of designing machined parts
* Geometric dimensioning and tolerancing
* Sheet metal design work
* Quality control measurement devices- CMM, micrometers, calipers, etc
* Mechanical experience with bearings, seals, shafts, gears etc
* Some finite element analysis
* Some prototyping and testing
* Solid understanding of materials, mechanics, dynamics, vibration control
Minimum Requirements:
